Risco LightSYS 2 Series User Manual

InstallerProgramming
Page 89
Quick Keys Parameter Default Range
 
ProximityAntiMask
=Tamper
No Yes/No
Usedtodeterminetheoperationoftheproximityantimaskingdetection
indicatedbytheMWchannelintheWatchOUTDTdetector.
YES:Proximityantimaskdetectionwillactivatethetamperalarm.
NO:Proximityantimaskdetectionwillberegardedasafaultevent.
NotethatProximityAMoperatesforapproximately
2.2secondswhen
thedetectorisapproachedincloseproximity.
EnsurethatProxAntiMaskhasbeenenabledwhenconfiguringthe
WatchOUTDTbuszoneparameters.
 
AudibleProximityTamper
No Yes/No
Thisparameterrelatestothebussiren.
YES:Aproximityantiapproachviolationwillactivatethesiren.
NO:Aproximityantiapproachviolationwillnotactivatethesirenand
willberegardedastroublebythesystem.

 
 
SirenAuxiliary=Tamper
No Yes/No
Thisparameterrelatestothebussiren.
YES:Asirenauxiliarytroublewillberegardedastamperalarmbythe
system.
NO:Asirenauxiliarytroublewillberegardedastroublebythesystem.

RFWake‐Up
No Yes/No
Determineswhetherthesystemcanwakethe2‐waykeypadupduring
exit/entrytimesorwhenfailingtosetthesystem.
YES:Thesystemwakesthekeypad.
NO:Thesystemcannotwakeupa2‐waykeypad.Usethisoptiontosave
b
atterylife.

KeyfobInstantArm
No Yes/No
YES:Awayarmingfromany2‐wayremotecontrolwillbeinstant.
NO:Awayarmingfromany2‐wayremotecontrolwillbedelayed,
followingexitdelay1.

Risco LightSYS 2 Series Specifications

General

Control Panel Type	Hybrid
Operating Temperature	-10°C to 55°C
Outputs	4
Communication	PSTN, GSM, IP
Wireless Frequency	868MHz
Programming	Via keypad
Backup Battery	12V, 7Ah
Remote Management	Yes
Humidity	Up to 93% non-condensing