Risco ProSYS - [2] Zones; Zone Configuration and Settings

ProSYS Quick Programming Setup 21
[2] Zones
[21] One by One
[22] Partitions/Group
[23] Zone Type
[23zz00] Not used [23zz08] I+Ex(Op)/En [23zz16] Special
[23zz01] Ex/En1 [23zz09] I+En
Follower
[23zz17] Pulsed KSW
[23zz02] Ex/En2 [23zz10] I+Instant [23zz18] Exit Termination
[23zz03] Ex(Op)/En [23zz11] UO Trigger [23zz19] Latch KSW
[23zz04] En Follower [23zz12] Day Zone [23zz20] EN.Fol+Stay
[23zz05] Instant [23zz13] 24 Hours [23zz21] KSW Delay
[23zz06] I+Ex/En1 [23zz14] Fire [23zz22] Latched KSW Dly
[23zz07] I+Ex/En2 [23zz15] Panic
[24] Zone Sound
[241] Silent [243] Buzzer Only [245] Door Chime
[242] Bell Only [244] Bell+Buzzer [246] Bell/A Buz/D
[25] Termination
[2501] N/C [2505] BUS Zone [2509] BZ Input DEOL
[2502] EOL [2506] TEOL [2510] BZ Input N/O
[2503] DEOL [2507] BZ Input N/C [2511] BZ Input TEOL
[2504] N/O [2508] BZ Input EOL
[26] Loop Response
[27] Cross Zone
[271] Zone Crossing
[28] Labels
[29] Maintenance
[291] Copy Zone [294] Delete Par. [297] WL Comm. Test
[292] Delete Zone [295] WL Calibrate [298] Zone Self Test
[293] Add/Copy Par. [296] WL Zone Alloc [299] Soak Test
[20] Miscellaneous
[201] Forced Arming [202] Pulsed Counter [203] BUS Zone Prms.