Risco ProSYS - [4] Code Maintenance; [5] Dialer; Dialer Link-Up and Communication

ProSYS Quick Programming Setup 23
[5] Dialer
[51] Link Up
[511] MS Link Up [512] U/D Phones
[52] Cust.
Accounts No.
[53] Comm Format
[54] Access & ID
[541] Access Code [542] ID Code [543] MS Lock
[55] Control
[5501] MS Enable [5507] User Initiate [5513] Show Handshake
[5502] FM Enable [5508] Callback U/D [5514] Audible Kissoff
[5503] U/D Enable [5509] Autobatch [5515] UD GSM Enable
[5504] Call Delay [5510] Answer
Machine
[5516] X.Modem Enable
[5505] Dial Tone [5511] UL Installation
[5506] Call Save [5512] Show Kissoff
[56] Parameters
[561] MS Retries [564] Dial Tone Time [567] Pulse Duty Cycle
[562] FM Retries [565] Redial Wait [568] Swinger Limit
[563] Rings to U/D [566] Dial Method [569] VM Retries
[57] Report Split
[571] MS Arm/Disarm [573] MS Non Urgent [575] Email (See Email
table)
[572] MS Urgent [574] Follow Me [576] Event Log
[58] Alarm Restore
[581] On Bell Time Out [582] Follow Zone [583] At Disarm
[59] Periodic Test
[591] MS Test [592] UD Test
[50] More
[501] Auto Codes [502-6] ACM
Parameters (See ACM
table)
[6] Report Codes
[61] Emergency Key
[62] Zones
[63] Accessory
Tamper
[64] Main Trouble
[65] PS Trouble
[66] Arm Codes
[67] Disarm Codes
[68] Miscellaneous
[69] Special Comm
[60] Accessory Code