Risco WatchOUT - Technical Specification

12 WatchOUT DT Installation Manual
Technical Specification
Electrical
45mA at 12 VDC (Stand by) Current consumption (Relay Mode)
70mA at 12 VDC (MAX with LED ON)
30mA at 12 VDC (Stand by), Current consumption (BUS Mode)
55mA at 12 VDC (MAX with LED ON)
Voltage requirements 9 -16 VDC
Alarm contacts 24 VDC, 0.1A
AM contacts 24 VDC, 0.1A
Dust output Open collector 70mA max
Physical
Size:
LxWxD
220 x 115 x 123mm (8.7 x 4.5 x 4.85 in.)
Weight 0.632 Kg (1.4lb)
Environmental
RF immunity (30MHz to 2GHz): 40V/m
Operating/Storage temperature -30°C to 60°C (-22°F to 140°F)
Ordering Information
Standard Units
Part Number Description
RK315DT0000A WatchOUT DT 10.525GHz + Swivel
RK315DT00UKA WatchOUT DT 10.587GHz + Swivel
RK315DT00FRA WatchOUT DT 9.9GHz + Swivel
Note:
Each of the detectors contains a standard swivel and 3 replacement lenses (P/N engraved on the Lens) 1.7m
low installation pet (RL300F), long-range (RL300R) and barrier lens (RL300B).
Accessories Kits
Part Number Description Weight
RA300B00000A WatchOUT Barrier Swivel Kit 0.1 Kg (0.23 lb)
RA300P00000A WatchOUT Pole Adaptor Kit 0.25 Kg (0.55 lb)
RA300C00000A WatchOUT Conduit Adaptor Kit 0.6 Kg (1.27 lb)
RA300HS0000A WatchOUT Demo Housing - -
RA300SC0000A WatchOUT Swivel Metal Conduit Adaptor 1Kg (2.2 lb)
Camera Option
Part Number Description
RA300VC0001A WatchOUT Camera Cover Adaptor 1
RA300VC017NA NTSC Narrow Camera For WatchOUT
RA300VC053NA NTSC Wide Camera For WatchOUT
RA300VC053PA WatchOUT PAL Wide Camera kit
RA300VC017PA WatchOUT PAL Narrow Camera kit
RA300VPS100A WatchOUT 220V PAL Camera Power supply
RA300VPS200A WatchOUT 120V Camera Power supply