Rishabh RISH LM 1340 - IP Parameter Selection; IP Address Setting; Subnet Mask Setting

This screen allows the user to set Subnet Mask.
Pressing “ ” key accepts the present value and advance to the “IP
address setting” screen (see Section 3.2.3.1) and pressing the “ ” key
accepts the present value and advance to the “Default gateway Setting”
screen (see Section 3.2.3.3).
Pressing the “ ” key advances to the “Subnet Mask Edit” mode
3.2.3.1 IP Address Setting
This screen allows the user to set Ip address.
Pressing “ ” key accepts the present value and advance to the “Quit Ip
parameters” screen (see Section 3.2.3.5) and pressing the “ ” key
accepts the present value and advance to the “Subnet Mask Setting”
screen (see Section 3.2.3.2).
Pressing the “ ” key advances to the “IP address Edit” mode
3.2.3.2 Subnet Mask Setting
Pressing the “ ” key sets the value and shows the “IP address Edit Screen” (see Section 3.2.3.1).
Pressing the “ ” or “ ” key scrolls the value of the most significant digit
from 0 through 9 or 9 through 0, respectively
Pressing the “ ” key accepts the present value at the cursor position and
advances the cursor to the next less significant digit.
user can set value from 000.000.000.000 to 255.255.255.255.
After entering the least significant digit, pressing the “ ” key sets the
value
3.2.3 IP Parameter Selection
Edit mode
41