Rishabh RISH LM 1340 - Page 49

3.2.5.1.1.4 Load Health Monitor Output
This screen is used to assign Relay in Load Health Monitor output mode.
Pressing “ ” key advances to “Load Health Monitor Configuration” menu
(see Section 3.2.5.1.1.4.1) whereas pressing “ ” key advances to “Quit
Load Health Output” menu.
XXXXXXXX
XXXXXXXX
3.2.5.1.1.5 Pre Paid Energy Output
This screen is used to assign Relay in Pre Paid Energy output mode.
Pressing “ ” key advances to “Parameter Selection” menu (see Section
3.2.5.1.1.5.1) whereas pressing “ ” key advances to “Quit Pre Paid
Energy Output” menu (see Section 3.2.5.1.1.5.5).
47