Setup Mode Reference
Setup mode allows you to perform basic configuration of the Mastermind PBC. This on-board editing is designed to
allow configuration of the most common functionality and features. Complete editing is available using the
Mastermind PBC editor software available for Mac and PC.
To enter setup mode, press and hold the 1 and 3. After about 3 seconds, the display will change, indicating you’re in
setup mode.
In Setup Mode, the footswitch buttons switch from their normal functions to become a menu for selecting setup
options. The text labels to the left of the buttons indicate their function when in Setup Mode.
Text Entry
When editing names and other text, the Mastermind PBC uses a special button configuration:
Text is edited by moving the cursor back and forth using the Up Arrow and Down Arrow buttons, then using the Val +
and Val - buttons to change the value of the character under the cursor.
The Bank Down button deletes the character to the left of the cursor.
The Bank Up button inserts a space character at the current cursor location.
The Mute button deletes all text.
The Function button switches between upper case and lower case. When set to upper case, the Function button’s LED
lights up in white.
Press Exit when you’ve finished editing the text. The text will be saved and you’ll be returned to the previous menu.
To Next Page
Loading...
Need help?
General
