1: Getting Started
Starting Up
Unpack your computer carefully and save all the packaging in case
you need to move the computer at a later date.
Connect up your, keyboard and mouse as shown on the Quick Start
Guide.
The power LED on the front of the computer will light when the
computer is switched on.
Wait for a few moments while the computer starts up then depending
on the model, your computer will boot either from the hard disk or
network (if connected).
Warning: The first boot of a new computer (Setup procedure) must
not be interrupted. If the system is accidentally turned on, do not
switch it off until you reach a suitable point. If you cannot see the
display, wait until disk activity (indicated by the HDD LED) has finished
before turning it off.
16
To Next Page
Loading...
