5: Technical Information
System Setup (CMOS) Program
The BIOS has a built in setup program which allow the user to modify
the computer's basic system parameters. This information is stored
in the battery backed CMOS memory.
Your computer has been set up by RM and is ready to use.
Use the CMOS Setup program to change the system settings if:
you change the amount of memory in your computer
you add or change a disk drive
you want to change the password
you want to set up special features.
Caution:
Do not attempt to run Setup and change the system settings unless
you understand what you are doing. You can experience serious
problems when using your computer if you select incorrect settings in
Setup.
Full details on entering, changing the system settings and saving
changes and exiting are in the
System Board
User’s Manual
(if
supplied).
61
To Next Page
Loading...
