5: Technical Information
Important:
Before changing any system settings make a record of all current
settings first.
Changing the password
Password protection can be used to keep your data secure by
preventing unauthorised access to the system and Setup program. By
default, the Setup program is protected by a password.
The password can be a maximum of eight characters, i.e. you can
use any letter or number. The password may be case sensitive. Be
very careful to choose a password that you will not forget and others
will not be able to guess.
Caution:
You should change the default password as soon as you receive your
computer. If YOU do not change the default password, someone else
may change it for you and prevent you from accessing the system.
If you forget your password, you will need to ring the RM helpline, or
return your computer to RM to be reset. This reset is not covered by
your warranty agreement. REMEMBER THIS BEFORE YOU CHANGE
YOUR PASSWORD - CHOOSE A PASSWORD THAT YOU WILL
REMEMBER.
The first time you change the password
The first time you select this option, you will need to enter the default
password. The default password is the password that has been set
up by Research Machines for use until you change the password.
The default password is RM
When you have entered the default password correctly, the system
prompts you to enter the new password. You will have to enter the
new password twice for confirmation.
62
To Next Page
Loading...
