Unit assembly
© robatherm 47
9. Apply roofing membrane strip (G).
Fig. 76: Applying roofing membrane
stripes
Press on roofing membrane strip (G)
with a roller or the palm of your hand.
Fig. 77: Pressing
10. Weigh down the roofing
membrane strip (G) with a sand
bag.
Prolonged application of load on the
installed roofing membrane strips (G) is
unnecessary.
Fig. 78: Weighing down
11. Press a thin strand of the sealing
paste of the roofing membrane
steadily into the joint edge.
Sealing paste of the roofing membrane
dries quickly to a dense film.
Fig. 79: Sealing paste
To Next Page
Loading...