Roberine F3 - Commissioning; Before First Use Checks

6 Commissioning
Your mower has been assembled and adjusted with great care.
6.1 Before first use
Before you start using your mower, make sure that:
• there are no transport damages;
• there are no oil leakages;
• the spare parts of your machine are present;
• the engine oil level is correct;
• the hydraulic oil level is correct;
• the coolant level is correct; and
• the cutting height is correct, see Adjusting the cutting height on page 32.
Then:
• Adjust the seat.
• Adjust the steering wheel.
• Add the right type of fuel.
6.1.1 Adjusting the seat
CAUTION! Never adjust the seat while the machine is moving. Bring the machine to a standstill before
adjusting the seat so as to avoid losing control of the machine.
NOTICE Refer to Seat on page 19 for references.
Adjusting the height and weight setting
• Pull the seat height adjuster (4) upwards to raise the seat.
The seat adjusts automatically to the driver's weight.
• Push the seat height adjuster (4) downwards to lower the seat.
Adjusting the damping
• Push the horizontal shock absorber adjuster (5) backwards to activate horizontal damping to dampen vibrations in the
driving direction.
• Push the horizontal shock absorber adjuster (5) forwards to block horizontal seat movement.
Adjusting the backrest
• Move the back rest adjuster (2) up or down to place it in the desired position.
Forwards/backwards adjustment
Pull the seat position adjuster (3) upwards and slide the seat forwards or backwards to the desired position. Release the
adjuster to lock the seat in position.
Adjusting the armrest
Rotate the armrest adjuster (1) to adjust the angle of the armrest.
Adjusting the lumbar support
Rotate the lumbar support adjuster (6) for the desired height and curvature of the lumbar support.
6.1.2 Adjusting the steering wheel
CAUTION!
• Avoid injury! Never adjust the steering wheel while the machine is moving. Bring the machine to a standstill
before adjusting the steering wheel so as to avoid losing control of the machine.
• Lock the steering wheel in the desired position before driving the machine.
Commissioning 24