Before you begin: Park the machine safely and let the engine cool down. Make sure the engine and radiator have
cooled to such an extent that they can be touched with bare hands.
1. Open the bonnet.
2. Slowly unscrew the cap as far as the first
stop to allow the pressure to escape.
3. Remove the cap from the recovery tank
(1).
4. Check the coolant level.
The coolant should be between the
maximum and minimum level.
5. If coolant level is low, add coolant.
6. Install and tighten the cap
7. Remove any dirt from the air intake grill
and the radiator.
8. Inspect the hoses for leaks and loose
connections.
9. Close the bonnet.
8.10 Fuel filter and fuel/water separator
Inspect the fuel/water separator after the first 50 hours of use. Replace the fuel filter every 500 hours or once a year.
Before you begin: Park the machine safely and let the engine cool down.
Replacing the fuel filter
NOTICE Make sure the fuel level is low before you replace the fuel filter.
1. Open the bonnet.
2. Unscrew the fuel filter (1) and remove it.
3. Install new fuel filter.
4. Check the deposit container.
Maintenance 46
To Next Page
Loading...
