To apply the parking brake:
1. Pull the parking brake lever upwards and
secure it in position.
To release the parking brake:
1. Pull the lever upwards slightly.
2. Press the button.
3. Lower the parking brake lever.
4. Release the parking brake lever.
6.2.2 Testing the mowing switch
With this test you will test the functioning of the mowing switch safety circuit.
1. Park the machine safely.
2. Sit on seat.
3. Put the mowing/back lapping switch in the mowing position.
4. Attempt to start the engine.
The engine should not start if the mowing switch is in the mowing position. If the engine does start, there is a problem
with the safety circuit. Contact your Roberine dealer for repair.
6.2.3 Testing the parking brake (1)
With this test you will test the functioning of the parking brake safety switch.
1. Park the machine safely.
2. Sit on seat.
3. Release the parking brake.
4. Attempt to start the engine.
The engine should not start if the parking brake has been released. If the engine does start, there is a problem with
the safety circuit. Contact your Roberine dealer for repair.
6.2.4 Testing the seat mechanism
With this test you will test the functioning of the seat safety mechanism.
1. Park the machine safely.
2. Sit on seat.
3. Start the engine.
4. Release the parking brake.
5. Stand up, but do not get off the mower.
The seat safety mechanism should stop the engine. If the engine does not stop, there is a problem with the safety
circuit. Contact your Roberine dealer for repair.
Commissioning 27
To Next Page
Loading...
