SET +
↑
ON/OFF ← O → CANCEL
↓
RESUME -
ON/OFF
• Activate the cruise control: the driving speed will not be changed or saved.
• De-activate the cruise control: the saved driving speed will be deleted.
NOTICE The cruise control will be de-activated when:
• The right foot pedal (backwards) is pressed.
• The brake is used.
• The seat is unoccupied.
CANCEL
• De-active the saved driving speed, the saved driving speed will not be deleted.
SET +
• Save the current driving speed.
• Increase the saved driving speed.
RESUME -
• Resume the saved driving speed.
• Decrease the saved driving speed.
NOTICE When using the foot pedal to increase the driving speed, the machine will drive faster. When releasing
the foot pedal, the machine will return to its saved driving speed.
7.3 Operating the mowing units
7.3.1 Before you start mowing
Inspect the terrain:
• Remove objects that could be thrown away by the machine from the area to be mowed.
• Keep people and animals out of the area to be mowed.
• Make sure there are no low-hanging branches or similar obstacles that can impair the driver within the area to be
mowed. Remove these obstacles.
• Inspect the area to be mowed. Follow a safe mowing pattern. Do not mow in areas where the traction or stability is
not sufficient.
7.3.2 Lowering the mowing units
Park the machine in a safe location.
CAUTION! Thrown objects can be dangerous. Before operating the mowing units:
• Make sure nobody is in the work area, particularly children.
• Remove objects that can be thrown away by the mowing units.
Refer to Description on page 16 and Command arm on page 21 for the location of the levers and switches.
1. Unlock the front mowing units by rotating the locking lever anticlockwise (7).
2. Start the engine.
3. Release the parking brake.
4. Place the hand throttle in the FULL SPEED position.
5. Put the mowing switch (1) in the MOWING position.
Operating 31
To Next Page
Loading...
