9.2 Preparing the machine for storage
Before you store the machine make sure that:
1. the machine and mowing units are free of grass and dirt.
2. you repair or replace all the worn or damaged parts.
3. you tighten any loose mounting materials.
4. you repair scratched or damaged metal surfaces, to prevent the formation of rust.
5. you wash the machine and apply wax to the relevant surfaces.
6. you run the engine for five minutes to dry the belts and pulleys.
7. you apply a thin layer of engine oil to all the rotating points and the wear points, to prevent the formation of rust.
8. you lubricate the grease nipples and check the tyre pressure.
CAUTION! Fuel vapours are flammable and can explode. The exhaust gases from the engine contain carbon
monoxide and can cause serious injury or even death. Make sure that:
• you do not run the engine for longer than is absolutely necessary to drive the machine into or out of the
storage location.
• you let the engine cool down before entering the storage location.
• you remove all dirt around the engine and the exhaust muffler.
• you store the machine at a safe distance from flammable materials.
• you do not store the machine in a building where any fuel vapours can come into contact with sparks or an
open flame.
Transport and storage 67
To Next Page
Loading...
