Roberts S2 - Configure System with Apple iOS Device; Find, Select, and Preset Radio Stations

Setup
10
Step 3 - Setup new audio system - Apple iOS device
If your device uses Android, please see page 11.
The UNDOK app has a setup wizard to help confi gure suitable audio devices to connect to your home WiFi network.
1. Open the UNDOK
app.
2. Setup a New Audio
system.
3. The app will prompt you
to use your device’s
WiFi settings to connect
to your speaker.
4. Select your S1 or S2
speaker. Once your
device has connected
to the speaker the Mode
indicator will flash
white in short bursts.
You must then return to
the UNDOK app.
5. Use the app to complete
the setup,including
giving the speaker a
name (living room, etc),
whether it is connected
via WiFi or Ethernet. If
you wish to connect using
an Ethernet cable please
(see page 40).
6. For a WiFi connection
the app will ask you to
choose a WiFi network
and enter the appropriate
password.
7. The Mode indicator on
your speaker will stop
fl ashing and remain lit
when it has successfully
connected to your
network.