Roberts S2 - Bluetooth Connectivity; Bluetooth Audio Streaming Overview; Pair Bluetooth Devices with Speaker

25
Mode
3
Mode / Bluetooth indicator
Bluetooth mode
The Bluetooth mode on your speaker allows you to play audio, play sound from video fi les and stream music from Bluetooth capable devices such
as your moblie phone, computer, tablet etc. through your speaker's loudspeakers.
● When a Bluetooth enabled device such as your S1 or S2 speaker is in a 'discoverable' state other Bluetooth devices can detect, pair with or
connect to it.
● 'Bluetooth pairing' occurs when two Bluetooth enabled devices agree to establish a connection and communicate with each other.
Connecting Bluetooth devices
1. Ensure that the Bluetooth capability on your phone, tablet or PC is enabled. You may
need to refer to the user documentation for your device, since the method will vary with
each device.
2. Ensure your speaker is switched on.
3. Press and release the Mode / Bluetooth Pair button on your speaker until the Bluetooth
mode is selected or alternatively open the UNDOK app and select 'Bluetooth' as the
music source. Your speaker will show that it is 'discoverable' and the Mode / Bluetooth
indicator will fl ash blue. If the indicator is blue and not fl ashing, then the speaker is
already connected to another device. To cause the speaker to become discoverable,
press and hold the Mode / Bluetooth Pair button.
4. Using the Bluetooth settings of your phone, tablet or PC direct it to search for 'discoverable'
devices. After a few seconds, you should see a device named 'S1 or S2'. Just occasionally
it may take longer for the speaker to be found by your device.
5. Select 'S1 or S2' to cause your phone, tablet or PC to pair with your speaker and to
establish a connection.
6. Once the connection is established the Bluetooth indicator will remain steady.
You can now begin playing music from your smart-phone, tablet, etc.
Some Bluetooth devices may require a 'Passkey' (an authentication key) in order to establish
a link between devices. A passkey is similar to a password, although you only need to use
the passkey once to establish a link. If your device asks for a passkey to be able to pair with
your speaker then enter a code of 0000 (four zeroes).