Robin RGV2800 Service Manual

10-3 ASSEMBLY PROCEDURES
10-3-1 FRONT COVER
Attach the front cover to the engine main bearing
cover. Match the faucet joint and tighten the bolts.
M8 x 20 mm bolt . . -4 pcs.
M8 spring washer - . .4 pcs.
120 - 140 kg-crn
8.7 - 10.1 fGlb
~~~ ~
10-3-2 ROTOR
(1) Wipe off oil, grease and dust from the tapered
portion
of engine shaft and.matching tapered
hole of rotor shaft.
(2) Mount the rotor to the engine shaft. Tighten
the through
bolt. Apply a wrench on the through
bolt and hit wrench handle clockwise with a
hammer to tighten.
If an impact wrench is
available, use
it.
Tightening torque :
113 - 132 N-m
RGV2800 115 - 135 kgcrn
8.7 - 10.8 ft-lb
RGV4100
RGV6100
22.5 - 245 N-m
230 - 250 kgtm
16.6 - 19.5 ft-lb
I
Fig. 1027
Fig. 10-22
- 46-

Robin RGV2800 Specifications

General

Brand	Robin
Model	RGV2800
Category	Portable Generator
Language	English