gf47
47
Manual Robin SlimLine ENG - v. 1.0.0
Name
Enable
LED
Source type
Edge
Action type
Schedule
The name that is associated with this event action
Enable the event action
Not used
Selects the event source for which this event action
is the response
Start the event action at the beginning of the event
source, the ending of the event source or on both
(rising / falling / both)
Selects the type of Action.
Select a defined schedule
* : For more information about the Robin / WEBRelay, see Tech-Note: “How-To_Robin_and_
WEBRelay” PDF on the support website: support.robintele.com !
C
Configuration
To Next Page
Loading...