RockShox PIKE - Page 40

40
Flight Attendant Control Module Removal
Carefully remove the Flight Attendant Control Module from the Carefully remove the Flight Attendant Control Module from the
compression damper top cap. Use both thumbs to evenly push the compression damper top cap. Use both thumbs to evenly push the
Control Module straight up and out of the top cap.Control Module straight up and out of the top cap.
NOTICE
Do not damage the internal mechanism when removing the Control
Module.
Clean the underside of the Control Module with a damp clean shop Clean the underside of the Control Module with a damp clean shop
towel.towel.
Set the Control Module aside.Set the Control Module aside.
NOTICE
Do not spray any cleaners onto the Control Module.
4
5