41
Flight Attendant Control Module Removal
Carefully remove the inner damper top cap / Control Module o-ring Carefully remove the inner damper top cap / Control Module o-ring
seal.seal.
NOTICE
Do not scratch the o-ring gland. Scratches can cause debris to enter
the top cap under the Flight Attendant Control Module.
Clean the inside of the top cap and o-ring gland with a damp clean Clean the inside of the top cap and o-ring gland with a damp clean
shop towel.shop towel.
NOTICE
Do not spray any cleaners into the top cap or on top of the
compression damper.
6
Pick
To Next Page
Loading...
