Publication IASIMP-QS003B-EN-P - October 2009 113
Create a Project in RSLogix 5000 Programming Software Chapter 9
7. Click Download.
The project Path updates.
8. Move the keyswitch on
controller to Run.
9. Select the PB examine on
instruction and press
Ctrl+T to toggle the state
from 0 to 1, or off to on.
10. Verify that the light on
the digital output module
turns on.
11. Press Ctrl+T to toggle
the state to 0 or off.
12. Go Offline by clicking
icon and selecting Go
Offline.
To Next Page
Loading...
