To Next Page

To Previous Page

Publication IASIMP-QS003B-EN-P - October 2009 181

Create a PanelView Plus Application Chapter 12

Test the Application on the PanelView Plus Terminal

1. On the PanelView Plus

terminal, press the Load

Application [F1].

2. Select your .mer file and

press Load [F2].

3. Press Yes [F7].

4. After the application

loads, press Run

Application [F2].

5. Press the push button

and verify that the

indicator turns on and

that the light on the

Compact digital output

module turns on.

6. Press the push button

again and verify that the

indicator and light turn

off.

Rockwell Automation 1768-L45 User Manual

Other manuals for Rockwell Automation 1768-L45