Publication IASIMP-QS003B-EN-P - October 2009 187
Create a Kinetix 6000 Application Chapter 13
Configure Your Logix SERCOS Module
1. Right-click on the 1768
Bus in the controller
organizer and select New
Module
2. Expand the Motion
module group and select
the 1768-M04SE module.
3. Click OK.
4. In the New Module
dialog box:
a. Name the module
SERCOS.
b. Select Slot 2 if using
EtherNet/IP module
or 1 if not.
c. Select Disable Keying.
d. Click OK.
To Next Page
Loading...
