Rockwell Automation 1768-L45 - Page 127

Publication IASIMP-QS003B-EN-P - October 2009 127
Add Distributed Point I/O Modules to the Project Chapter 10
6. Click Yes.
7. Click OK.
8. Save the DeviceNet
configuration file.
You will use this file to
Create DeviceNet Tags,
and then Add Ladder
Logic, later in this
chapter.
9. Close RSNetworx for
DeviceNet software.
For DeviceNet systems,
skip to page 130
, Create
DeviceNet Tags and Add
Ladder Logic.