Publication IASIMP-QS003B-EN-P - October 2009 147
Create a PowerFlex 70 Application Chapter 11
11. Change #90, Speed Ref A
Sel, to DPI Port 5.
This configures the drive
to use the speed reference
from the network.
12. Verify that #300–317,
Datalinks, are set to 0.
13. Verify that #361–366,
Digital In# Sel, to Not
Used.
14. Click OK.
15. Click Yes.
The configuration is
downloaded to the
PowerFlex 70.
16. Right-click the
1769-SDN and select
Properties.
To Next Page
Loading...
