Rockwell Automation 1768-L45 - Page 50

50 Publication IASIMP-QS003B-EN-P - October 2009
Chapter 2 Prepare the Computer and Load Controller Firmware
3. Click Next when the
Welcome screen appears.
4. Select the controller
catalog number and click
Next.
5. Move the keyswitch on
controller to Program.
6. If the Current Revision
matches the firmware
revision you want, click
Cancel, then skip to the
next section.
Otherwise, select the
revision level to which
you want to update the
controller and click Next.
If you are not sure what
revision to use, select the
latest.
18.0