Rockwell Automation Publication 750-QS100B-EN-P - August 2020 61
PowerFlex 750-Series AC Drives with TotalFORCE Control Quick Start
Additional Resources
These documents contain additional information concerning related products from Rockwell Automation.
Resource Description
Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1
Provides general guidelines for installing a Rockwell Automation industrial system.
PowerFlex 750-Series Products with TotalFORCE Control Technical Data,
publication 750-TD100
Provides detailed information on:
• Drive and bus supply specifications
• Option specifications
• Fuse and circuit breaker ratings
PowerFlex 750-Series Products with TotalFORCE Control Installation
Instructions, publication 750-IN100
Provides the basic steps to install PowerFlex® 755TL low harmonic drives, PowerFlex 755TR
regenerative drives, and PowerFlex 755TM drive systems.
PowerFlex 755T Flux Vector Tuning Application Technique,
publication 750-AT006
Provides guidance on how to tune Flux Vector position and velocity loops, filters, and other
features to achieve the level of performance that is required for a given application. This
publication is intended for novice drives users and users with advanced skills.
PowerFlex 20-HIM-A6 / -C6S HIM (Human Interface Module) User Manual,
publication 20HIM-UM001
Provides detailed information on HIM components, operation, and features.
Low Voltage Motor Protection White Paper, publication 193-WP008
Provides information about short-circuit protection, and overload protection for low voltage
motors.
PowerFlex 755TM IP00 Open Type Kits Installation Instructions, publication
750-IN101
Provides instructions to install IP00 Open Type kits in user-supplied enclosures.
PowerFlex 755TM AC Precharge Modules Unpacking and Lifting Instructions,
publication 750-IN102
These publications provide detailed information on:
• Component weights
• Precautions and recommendations
• Hardware attachment points
• Lifting the component out of the packaging
PowerFlex 755TM DC Precharge Modules Unpacking and Lifting Instructions,
publication 750-IN103
PowerFlex 755TM Power and Filter Modules Unpacking and Lifting
Instructions, publication 750-IN104
PowerFlex 750-Series Service Cart and DCPC Module Lift Instructions,
publication 750-IN105
Provides detailed setup and operating instructions for the module service cart and DC
precharge module lift.
PowerFlex 755TM Power and Filter Module Storage Hardware Instructions,
publication 750-IN106
Provides detailed installation and usage instructions for this hardware accessory.
PowerFlex 755T Module Service Ramp Instructions, publication 750-IN108
Provides detailed usage instructions for the module service ramp.
PowerFlex 755TM IP00 Open Type Kits Technical Data, publication 750-TD101
Provides detailed information on:
• Kit selection
• Kit ratings and specifications
• Option specifications
PowerFlex 750-Series Products with TotalFORCE Control Hardware Service
Manual, publication 750-TG100
Provides detailed information on:
• Preventive maintenance
• Component testing
• Hardware replacement procedures
PowerFlex 750-Series Safe Speed Monitor Option Module Safety Reference
Manual, publication 750-RM001
These publications provide detailed information on installation, setup, and operation of the
750-Series safety option modules.
PowerFlex 750-Series Safe Torque Off Option Module User Manual,
publication 750-UM002
PowerFlex 750-Series ATEX Option Module User Manual, publication 750-
UM003
PowerFlex 755 Integrated Safety - Safe Torque Off Option Module User
Manual, publication 750-UM004
PowerFlex 755/755T Integrated Safety Functions Option Module User Manual,
publication 750-UM005
PowerFlex Drives with TotalFORCE Control Built-in EtherNet/IP Adapter User
Manual, publication 750COM-UM009
Provides information on how to install, configure, and troubleshoot applications for the
PowerFlex drives with the built-in EtherNet/IP™ adapter.
Industry Installation Guidelines for Pulse Width Modulated (PWM) AC Drives,
publication DRIVES-AT003
Provides basic information on enclosure systems, considerations to help protect against
environmental contaminants, and power and grounding considerations for installing Pulse
Width Modulated (PWM) AC drives.
Drives in Common Bus Configurations with PowerFlex 755TM Bus Supplies
Application Techniques, publication DRIVES-AT005
Provides basic information to properly wire and ground the following products in common
bus applications:
• PowerFlex 755TM drive system for common bus solutions
• PowerFlex 750-Series AC and DC input drives
• Kinetix™ 5700 servo drives
PowerFlex 750-Series I/O, Feedback, and Power Option Modules Installation
Instructions, publication 750-IN111.
Provides drive compatibility, jumper settings, terminal designations, wiring examples for
analog and digital I/O, feedback, and auxiliary power options option modules.
To Next Page
Loading...
Need help?
General
