Rockwell Automation CENTERLINE 2100 User Manual

40 Publication 2100-IN012C-EN-P - April 2009
Chapter 2 Installation Procedures
Bus Torque Specifications
Tighten all bus splice connections with a torque wrench and socket at
intervals established by your maintenance policy. See Chapter 9
for
suggested maintenance. If a torque wrench is not available, tighten
until the conical spring washer is flat.
Torque values can be found on the information label on the interior of
the vertical wireway door or on the interior right-hand side plate of
frame mounted units.

Rockwell Automation CENTERLINE 2100 Specifications

General

Brand	Rockwell Automation
Model	CENTERLINE 2100
Category	Control Systems
Language	English