Need help?Do you have a question about the Rockwell powerflex 700s and is the answer not in the manual?
Details critical warnings for safe operation and potential hazards.
Instructions for generating comprehensive reports for module analysis.
Details common faults for PowerFlex 700S drives and suggested actions.
Details common faults for PowerFlex 700H drives and suggested actions.
Guides users through diagnosing common drive issues and applying fixes.
Details steps for safely powering down the drive and handling components.
Pre-power checks including DC bus voltage and diode tests.
Guide for diagnosing power structure issues without applying full power.
General| Model | PowerFlex 700S |
|---|---|
| Category | AC Drive |
| Output Voltage | 0 to Input Voltage |
| Frequency | 50/60 Hz |
| Input Voltage | 200-240V, 380-480V, 500-600V |
| Horsepower | 0.5...1750 Hp |
| kW | 0.4 kW to 250 kW |
| Output Power | 0.37...1300 kW / 0.5...1750 Hp |
| Amperage | Varies by model |
| Control Method | Sensorless Vector Control, Closed Loop Velocity Vector Control, Closed Loop Torque Vector Control |
| Communication Options | EtherNet/IP, ControlNet, DeviceNet, Profibus |
| Enclosure Type | IP20, IP30 |
| Safety | Safe Torque-Off |
| Storage Temperature | -40...70 °C (-40...158 °F) |
| Humidity | 5% to 95% non-condensing |
| Altitude | 1000m (3300ft) without derating |
| Dimensions | Varies by model |
| Weight | Varies by model |
To Next Page
