Rodgers 960 - Accessing the Voice Palette; Unlocking the Voice Palette; Locking the Voice Palette

The voices located on one stop control cannot be played simultaneously. However, a
stop's primary voice may be stored on one combination piston, and its Voice Palette selection
may be stored on another combination
piston. Note: On some earlier organs, the Voice
Palette selections cannot be savedon combination pistons. Contact your local authorized
Rodgers representative
for information on updating the instrument.
• ACCESSING THE VOICE PALETTE:
1. Press and hold the SET piston.
2. Turn on the stop to be changed. For example, select the 16' Principal in the Pedal.
The Console Display reads:
PO PRINCIPL 16=
*PRINCIPL 16*
3. Rotate the Alpha Dial to view the available Voice Palette selection. The voice may
be previewed as
it is selected.
The voice selections made using this procedure can be saved
in General and Divisional
combination pistons.
All drawknobs return to their default voices as labeled when the organ is
turned off.
In order
to save Voice Palette selections in combination pistons, the Voice Palette must
first be unlocked. This locking feature only prevents "blind" changes to Voice Palette
selections; manual changes are always possible.
• UNLOCKING THE VOICE PALETTE:
1. Press and hold the SET piston.
2. Turn the Select Knob counter clockwise (left). The Console Display reads:
VOICE PALETTE
LOCKED
3. Rotate the Alpha Dial to unlock the Voice Palette. Voice Palette selections can
now be stored
in combination pistons.
When the Voice Palette
is locked, combination pistons will not affect Voice Palette
selections, even selections previously saved
in combination pistons.
• LOCKING THE VOICE PALETTE:
1. Press and hold the SET piston.
25
fill
-
it
it
~
•
Ii
III
•
•
,.
•
•
•
"
ill
ill
..
•
..
•
til
•
..
..
•
•
iiillio.J
~
•
•
.-
..
•
..
•
..
..,
..
•
•
--
..
..
•
-
•
.-
.,
.-
~
•
•
~
_" .J