37
SUSTAIN
SWITCH
Remember,
MIDI
default settings can be changed by performing a MIDI Save procedure.
CH
1*
OFF
o
NORM
64
MIDI GT A
=
Program Change (PGM)
Variation (VAR)
Octave Transpose
Velocity (VEL)
Great Master Channel
Notes and Expression
12
Swell Master Channel Notes and Expression
13
Choir Master Channel Notes and Expression
15
Pedal Master Channel Notes and Expression
14
ENABLING/DISABLING MIDI
MASTER
CHANNELS
The organ sends and receives MIDI information on these channels unless they are
disabled.
It
may be necessary to disable one
or
more Master Channels when using the organ
console as a
MIDI
keyboard controller
in
multi-track
or
multi-layer sequencing to avoid
duplicating note data on multiple tracks.
ADDITIONAL
MIDI
SETTINGS ON
COMBINATION
PISTONS
The Rodgers 960 reserves several MIDI channels for recording and playback
of
the organ
using a MIDI sequencer. One channel
is
reserved for each division as follows:
After additional
MIDI
settings have been selected on a MIDI coupler piston, these settings
can be saved on any General
or
corresponding Divisional combination piston.
• SAVING MIDI SETTINGS ON A COMBINATION PISTON:
1.
Select the
MIDI
coupler piston (and organ stops,
if
desired).
2.
Press and hold the
SET
piston.
3.
Press the desired combination piston.
4.
Release both pistons.
The factory default settings for the MIDI coupler pistons are:
A foot switch
is
located
on
the top left edge
of
the Choir expression shoe. This switch
will sustain MIDI voices playing from MIDI GT A coupler piston. Press the switch to sustain,
release to stop.
* This channel will be different for each MIDI coupler piston. Note: Please refer to the
MIDI
channel list
at
the beginning
of
the MIDI section.
To Next Page
Loading...
