Trying Out the Instrument
R&S
®
RTO2000
56Getting Started 1332.9719.02 ─ 08
Now the result box also shows the result of the frequency measurements.
6. Tap "Advanced Setup".
In the list of selected measurements, you see a "Settings" icon at the period and
frequency measurements. Tap the icon to adjust measurement-specific settings.
7. Tap "Set as QuickMeas".
The current configuration is set as default quick measurement and can be repeated
until you save another configuration.
8. Close the dialog box.
9.
To save space in the display, minimize the result box:
Do not close the result icon, as you need the results for the search example (see
Chapter 4.10, "Performing a Search", on page 63).
Performing Basic Measurements
To Next Page
Loading...
