Trying Out the Instrument
R&S
®
RTO2000
67Getting Started 1332.9719.02 ─ 08
11. Press [Run Stop] to start the next acquisition and watch the screen.
12.
To close the test, tap
in the "MaskTest" results box.
4.12 Printing and Saving Screenshots
You can print and save screenshots of the current display to document your results. In
the following examples, you print the current display as a black and white graphic with
inverted colors, i.e. a black waveform is printed on a white background. Then you save
some screenshots using the Camera key.
To print a screenshot
You need a printer that is connected to the instrument. If the instrument is connected to
the network, you can also use a network printer.
1. Open the "File" menu and tap "Print Setup".
2. Tap "Color" and select "Black and white".
3. Enable "Inverse color".
4. Disable "Include signal bar".
Printing and Saving Screenshots
To Next Page
Loading...
