Preparing for Use
R&S
®
RTO2000
17Getting Started 1332.9719.02 ─ 08
Connecting a USB flash drive
If the installation of a USB flash drive is successful, Windows informs you that the
device is ready to use. The device is made available as a new drive ("D:") and is dis-
played in Windows Explorer. The name of the drive depends on the manufacturer.
Connecting a keyboard
The keyboard is detected automatically when it is connected. The default input lan-
guage is English – US.
To configure the keyboard properties:
1. Tap the "Find" icon (magnifier) on the Windows taskbar.
2. Type keybord.
3. Select "Edit language and keyboard options".
Connecting a mouse
The mouse is detected automatically when it is connected. To configure the mouse
properties:
1. Tap the "Find" icon (magnifier) on the Windows taskbar.
2. Type mouse.
3. Select "Mouse settings".
Connecting a printer
When printing a file, the instrument checks whether a printer is connected and turned
on, and whether the appropriate printer driver is installed. If necessary, printer driver
installation is initiated by the Windows system. To install a printer driver:
1. Tap the "Find" icon (magnifier) on the Windows taskbar.
2. Type printer.
3. Select "Printers & scanners".
4. Select "Add a printer or scanner".
2.4.2 Connecting an External Monitor
You can connect an external monitor or projector to the R&S RTO. The following con-
nectors are available:
●
"DVI-D" on page 23
●
"DisplayPort" on page 23
Before connecting an external monitor, ensure that the monitor and the R&S RTO are
connected to a ground contact. Otherwise the instrument can be damaged.
Connecting External Devices
To Next Page
Loading...
