Operating the Instrument
R&S
®
RTO2000
95Getting Started 1332.9719.02 ─ 08
To enter data with the on-screen keyboard
1. Double-tap the entry field to open the on-screen keyboard.
If available, you can also tap the keyboard icon on the right of the entry field.
2. Enter the text as you would on a normal keyboard.
● To enter a series of capital characters, tap "Caps".
To enter one capital character, tap "Shift".
● To use the currently defined value, tap "Cur". This is the value that was used
before the keyboard was displayed.
● The arrow buttons move the cursor left or right.
● "Bksp" deletes the last character before the cursor.
3. Tap "Enter" to complete the entry.
To enter numeric data in a dialog box with navigation controls
1. To navigate to the entry field, press the [⇤] and [⇥] keys.
2. To change the value with a small step size, turn the rotary knob.
Alternatively, press the [▲] and [▼] keys for a larger step size.
If you edit numeric data in tables, the entry field must be in edit mode. To activate the
edit mode, press ENTER, or the [☑] key, or the navigation rotary knob.
5.9 Messages
Status messages of the instrument are displayed for a few seconds. Then they are
saved in a message box in the upper right corner of the screen. By default, the mes-
sage box is closed. You can open it to read the messages and to delete them.
► To open and close the message box, tap the "Info" button.
Messages
To Next Page
Loading...
