Operating the Instrument
R&S
®
RTO2000
94Getting Started 1332.9719.02 ─ 08
For data input in dialog boxes, the touchscreen provides an on-screen keypad to enter
numeric values and units. For text input, the on-screen keyboard with English key lay-
out is used.
To enter values with the on-screen keypad
1. Double-tap the entry field.
The on-screen keypad opens.
2. Enter the numeric value using the following methods:
● To use the default value, tap "Reset" (if available).
● To use the minimum or maximum value, tap "Min" or "Max", respectively.
● To increase the displayed value in fixed steps, tap "Inc".
To decrease the value in fixed steps, tap "Dec".
To toggle between small steps and large steps, tap the "Steps" icon.
● To get the value that was used before the keypad was displayed, tap "Cur".
● To enter a user-defined value, tap the numbers and complete the entry by tap-
ping the unit button.
– The arrow buttons move the cursor left or right.
– "Bksp" deletes the last character before the cursor.
– "±" changes the sign of the value.
Entering Data
To Next Page
Loading...
