Rohde & Schwarz R&S RTO2000 Series - Entering Data

Operating the Instrument
R&S
®
RTO2000
93Getting Started 1332.9719.02 ─ 08
3.
To restore the complete dialog box, tap the "Maximize" icon in the small box.
To close a dialog box
► Tap the "Close" icon in the upper right corner.
Or:
Press the [Esc] key on the front panel.
To select an option in a dialog box
► Tap the required option.
Or:
Press the [⇤] and [⇥] keys to navigate to the required option. Then press the [☑]
key.
To select an option in a list
If many options are available - for example, for the trigger type - the options are provi-
ded in a list. The current selection is shown on the list button.
► Tap the list button. Then tap the required option.
Or:
Use the front panel keys:
a) Press the [⇤] and [⇥] keys to navigate to the list button.
b) Press the [☑] key to open the list.
c) Press the [▲] and [▼] keys to navigate to the required option in the list.
d) Press the [☑] key to select the marked option.
5.8 Entering Data
Most important parameters have their own rotary knobs on the front panel. When you
turn a knob, the input box appears the lower right corner of the screen, showing the
parameter name and current value.
Using rotary knobs
1. Turn the knob to change the value.
2. To toggle the increment, tap the "Steps" icon in the input box.
3. To set the parameter to the autoset value (if available), tap the "RESET" icon.
Entering Data