Trying Out the Instrument
R&S
®
RTO2000
64Getting Started 1332.9719.02 ─ 08
5. Select "Enable" to start the continuous search on the acquired data.
6. Close the "Search" dialog box.
7. In the "Search Results" box, select "Show search zoom windows".
The acquisition stops, and the detected overshoots of the last acquisition are listed
in the search result table. The search zoom window shows the last result that was
found. Vertical lines indicate the time values for which a result was found.
8. In the results table, tap the row of the search result that you want to display in the
search zoom diagram.
Performing a Search
To Next Page
Loading...
