Rohde & Schwarz R&S SMB100B - Preparing for Use; Lifting and Carrying; Unpacking and Checking

Preparing for use
R&S
®
SMB100B
19Getting Started 1422.1045.02 ─ 06
4 Preparing for use
Here, you can find basic information about setting up the product for the first time.
4.1 Lifting and carrying
Use the handles at the side, for lifting and carrying the R&S SMB100B, see "Lift-
ing and carrying the product" on page 8. Use the handles at the front, for mount-
ing the R&S SMB100B in a rack.
1
2
Figure 4-1: Instrument side view with front handles (1) and side handles (2)
4.2 Unpacking and checking
1. Unpack the R&S SMB100B carefully.
2. Retain the original packing material. Use it to protect the control elements and
connectors when transporting or shipping the R&S SMB100B later.
See also chapter "Transporting" in the user manual.
3. Using the delivery notes, check the equipment for completeness.
4. Check the equipment for damage.
If the delivery is incomplete or equipment is damaged, contact
Rohde & Schwarz.
Unpacking and checking