Instrument control
R&S
®
SMB100B
55Getting Started 1422.1045.02 ─ 06
R&S NRP power sensors
Shows a connected external power sensor. The button displays the current
readings when the sensor is active.
Active dialogs
Indicates the dialog name of each active dialog in a separate button.
"Info" key
Provides access to status and error messages.
Note: The warning symbol signifies a permanent error message.
7.3.4 Additional display characteristics
The following section provides a short insight on the indication of the screen in
general, and significant elements that you see under specific operating modes, in
dialogs or settings.
●
Appearance of active elements
– Active elements like On/Off switches, state buttons have a blue back-
ground.
– Selected elements are framed or highlighted orange.
– Inactive elements are gray.
●
On-Screen keypads
As additional means of interacting with the instrument without having to con-
nect an external keyboard, either a numerical or alphanumerical on-screen
keypad appears when you activate an entry field (see Chapter 7.5, "Entering
data", on page 57).
●
Info line
The "Info line" shows brief status information and error messages. It appears
when an event generates a message. If selected, the R&S SMB100B shows
information on static errors and the error history.
●
Key parameters indicated in tab labels
Most dialogs are divided into tabs with logically grouped parameters. The tab
label expresses the content and can also contain status indicators or the set
value of a key parameter.
Understanding the display information
To Next Page
Loading...
