Rohde & Schwarz R&S SMB100B - Status Bar; Tile Diagram

Instrument control
R&S
®
SMB100B
53Getting Started 1422.1045.02 ─ 06
3
1 2
Figure 7-1: Home screen
1 = Taskbar/softkey bar with "Home" and "Info" key
2 = Status bar
3 = Tile diagram
● Status bar........................................................................................................53
● Tile diagram.....................................................................................................53
● Taskbar............................................................................................................54
● Additional display characteristics.................................................................... 55
7.3.1 Status bar
The status bar at the top of the screen indicates the RF frequency and the level of
the output signal provided to the DUT. You can set both parameters directly here.
7.3.2 Tile diagram
The tile diagram is the main entry to the settings of the R&S SMB100B.
Understanding the display information