Instrument control
R&S
®
SMB100B
54Getting Started 1422.1045.02 ─ 06
Tile Access to:
"Modulation"
●
Analog and stereo
1)
, and pulse
1)
modulation settings
●
Built in LF generator
"System Config"
●
"Save/Recall": settings for saving and loading instrument configura-
tions
●
"Remote access": Network and emulation settings.
●
"Setup": general system configuration
"Sweep"
●
Frequency and level sweeps
●
List mode
"Frequency"
●
RF frequency and phase
●
Reference frequency
"Level"
●
RF level
●
Attenuator
●
Automatic level control
●
User correction
"Power sensors"
●
Power sensors
1)
requires additional options
7.3.3 Taskbar
The "Taskbar" shows a home and an info button, and assigns a labeled button
whenever you open a dialog. If more dialogs are open than the taskbar can dis-
play, touch and swipe the taskbar to scroll up and down.
The buttons shown in the following example represent the variants.
Table 7-1: Example of buttons in the taskbar
"Home" button
Returns to the home screen.
"Busy" indicator
Indicates a running process.
"User Menu"
Lists parameters that can be defined for quick access.
Shows the current remote access connections when the instrument is
remotely controlled.
Tip: An indicator in the "System Config" tile shows the current remote con-
trol status.
Understanding the display information
To Next Page
Loading...
