Instrument control
R&S
®
SMB100B
61Getting Started 1422.1045.02 ─ 06
If a dialog box is opened, the help topic for the current tab is shown. Other-
wise the "Contents" page appears.
Navigating in the table of contents and in the help topics
1. To move through the displayed contents entries, tap on an entry and scroll or
use a connected mouse or the [Up/Down] keys.
Entries with a plus sign contain further entries.
2. To display a help topic, tap on the topic name or double-click the topic name
or press the [Enter] key.
3. To follow a cross-reference, tap on the link text.
4. To return to the previous page, select "Back".
This function scrolls back all steps you have performed before.
5. Use the "scroll bars" to shift the visible section of content shown.
6. To maximize the "Topics" area, tap the "Hide Contents Tree" button to hide the
contents tree.
Using the index
1. Select the "Index" button.
2. Enter the first characters of the topic you are interested in.
The entries starting with these characters are displayed.
3. Tap on the index entry.
The corresponding help topic is displayed.
7.7 Remote control
In addition to working with the R&S SMB100B interactively, located directly at the
instrument, it is also possible to operate and control it from a remote PC.
The R&S SMB100B supports various methods for remote control:
●
Connecting the instrument to a LAN (see Chapter 4.7, "Connecting to LAN",
on page 24)
●
Using the LXI browser interface in a LAN
●
Connecting a PC via the IEC-bus (IEEE 488) interface
Remote control
To Next Page
Loading...
