Safety and regulatory information
R&S
®
SMB100B
7Getting Started 1422.1045.02 ─ 06
1 Safety and regulatory information
The product documentation helps you use the product safely and efficiently. Fol-
low the instructions provided here and in the following chapters.
Intended use
The product generates radio frequency (RF) signals for the development, produc-
tion and verification of electronic components, modules or devices. The product is
intended for industrial use, for example for production and conformance testing,
maintenance and engineering laboratories.
Use the product only for its designated purpose. Any other use is considered
improper use. Observe the operating conditions and performance limits stated in
the data sheet.
Target audience
This document targets at all users, including technicians, operators, administra-
tors and maintenance personnel. The required skills and experience of the users
depend on the test setup and application of the product.
Where do I find safety information?
Safety information is part of the product documentation. It warns you of potential
dangers and gives instructions on how to prevent personal injury or damage
caused by dangerous situations. Safety information is provided as follows:
●
In Chapter 1.1, "Safety instructions", on page 7. The same information is
provided in many languages as printed "Safety Instructions". The printed
"Safety Instructions" are delivered with the product.
●
Throughout the documentation, safety instructions are provided when you
need to take care during setup or operation.
1.1 Safety instructions
Products from the Rohde & Schwarz group of companies are manufactured
according to the highest technical standards. To use the products safely, follow
the instructions provided here and in the product documentation. Keep the prod-
uct documentation nearby and offer it to other users.
Safety instructions
To Next Page
Loading...
