17
Arpeggiator
Mixer
This function can automatically generate arpeggios. Simply play a chord
with your left hand, the instrument will play a preset arpeggio pattern and
produce beautiful melody.
Turn the Arpeggiator on or o
1. Press and hold the [TONE] button to turn on this function. The “ARP.”
icon lights up.
2. Press and hold the [TONE] button again to turn o this function. The
“ARP.” icon turns o.
Note:
Each tone has a preset arpeggio pattern. When you change the tone,
arpeggio pattern and tempo will change.
Set the Split Point of Arpeggiator
When the arpeggiator is turned on, the keyboard will be split into two ar-
eas. Play chords in the left hand area, and melody in the right hand area.
The default split point is the same as in the split function: F#3 (19).
You can adjust the volume of dierent tracks in the mixer.
1. Press the [MIXER] button to enter the mixer menu. The current mixer
parameter on LCD blinks.
2. Use [<]/[>] buttons to select a parameter.
3. Press the [MIXER] button again to move the cursor to the volume
level. The volume level will blink.
4. Use [<]/[>] buttons to change the volume. You can press the [<] and
[>] buttons simultaneously to restore the default volume.
5. Press the [STYLE], [TONE] or [SONG] button to exit the mixer menu.
Detailed parameters and their volume range:
Parameter LCD Display Range
Accomp volume XXX Accomp OFF, 1~32
Rhythm track volume XXX Rhythm OFF, 1~32
Bass track volume XXX Bass OFF, 1~32
Chord 1 track volume XXX Chord1 OFF, 1~32
Chord 2 track volume XXX Chord2 OFF, 1~32
Chord 3 track volume XXX Chord3 OFF, 1~32
Upper 1 track volume XXX Upper1 OFF, 1~32
Upper 2 track volume XXX Upper2 OFF, 1~32
Lower track volume XXX Lower OFF, 1~32
Notes:
1. It will exit the mixer menu if there is no operation in 60 seconds.
2. Repeatedly press the [<] and [>] buttons simultaneously to mute the
selected track (LCD displays “OFF”) or unmute it.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
