Roland FP-4 User Manual

126
Effects List
No
Effect Name Value Description
1
Equalizer 0–30 Gain of the low range (-15– +15 dB)
2 Spectrum 0–30 Gain of 500 Hz band (-15– +15 dB)
3 Enhancer 0–127 Sensitivity of the enhancer (0–127)
4 Isolator 0–64
At -60 dB, the sound of the middle range becomes inaudible. 0 dB is equivalent to the
input level of the sound (-60– +4 dB)
5 Low Boost 0–12 Amount by which the lower range will be boosted (0– +12 dB)
6 High Pass Filter 0–127
Cutoff frequency of the filter
Increasing this value will raise the cutoff frequency. (0–127)
7 Overdrive 0–127
Output Level (0–127)
8 Distortion 0–127
9 Overdrive2 0–127
10 Distortion2 0–127
11 Speaker Simulator 0–127
12 Guitar Amp Simulator 0–13
Type of guitar amp
(JC-120, CLEAN TWIN, MATCH DRIVE, BG LEAD, MS1959I, MS1959II, MS1959I+II,
SLDN LEAD, METAL5150, METAL LEAD, OD-1, OD-2 TURBO, DISTORTION, FUZZ)
13 Phaser 1–127
Frequency of modulation (Hz) (0.05–10.00 Hz)
14 Multi Stage Phaser 1–127
15 Infinite Phaser 0–127
Speed at which to raise or lower the frequency at which the sound is modulated
(+: upward / -: downward) (-100– +100)
16 Stereo Flanger 0–127 Depth of modulation (0–127)
17 3D Flanger 0–127 Depth of modulation (0–127)
18 2Band Flanger 1–127 Rate at which the low-range flanger sound is modulated (Hz) (0.05–10.00 Hz)
19 Auto Wah 1–127 Frequency of modulation (Hz) (0.05–10.00 Hz)
20 Humanizer 0–21 Frequency at which the two vowels switch
21 Ring Modulator 0–127 Adjusts the frequency at which modulation is applied. (0–127)
22 Tremolo 1–127
Frequency of the change (Hz) (0.05–10.00 Hz)
23 Auto Pan 1–127
24 Slicer 12–21 Rate at which the 16-step sequence will cycle
25 Compressor 0–127
Adjusts the volume at which compression begins (0–127)
26 Limiter 0–127
27 Stereo Chorus 0–127
Depth of modulation (0–127)
28 Hexa Chorus 0–127
29 Tremolo Chorus 0–127 Modulation depth of the chorus effect (0–127)
30 Space D 0–127 Depth of modulation (0–127)
31 3D Chorus 0–127 Modulation depth of the chorus effect (0–127)
32 2Band Chorus 0–127 Modulation depth for the low-range chorus sound (0–127)
33 Rotary 0–1 Simultaneously switch the rotational speed of the low frequency rotor and high
frequency rotor (Slow, Fast)
Slow: Slows down the rotation to the Slow Rate.
Fast: Speeds up the rotation to the Fast Rate.
34 Rotary2 0–1
35 Rotary Multi 0–1
FP-4-e.book 126 ページ ２００７年５月２４日 木曜日 午後７時１０分

Roland FP-4 Specifications

General

Polyphony	128 voices
Rated Power Output	12 W x 2
Effects	Reverb, Chorus
Recorder	Approx. 30, 000 notes
Display	3-digit 7-segment LED
Connectors	MIDI connectors (IN, OUT)
Power Supply	AC adaptor (included)
Included Accessories	AC Adaptor Power Cord Music Rest
Speakers	12 cm x 2