Roland FP-4 User Manual

50
Playing Along with Rhythms
The FP-4 has an optimal chord progression pattern for each Rhythm.
You can change the chord progression pattern if you want.
For more information on chord progression patterns, refer to the “Chord Progression
Pattern List” (p. 117).
fig.Panel-Session-3.eps
1.
Press the [Session Partner] button so Session Partner starts playing.
2.
Hold down the Track [2] button and press the [-] or [+] button to change
the chord progression pattern.
The pattern number of the currently selected chord progression will be displayed while you hold
down the Track [2] button.
fig.d-12.eps
If you change the chord progression pattern during the performance, a fill-in will be played, and
then the performance will begin using the selected chord progression.
Stopping the Session Partner Performance
1.
Press the [Session Partner] button.
When you press the [Session Partner] button, an ending will be played and then Session Partner
will stop.
You can change the root note of the chord. Refer to “Selecting the Root Note of the
Chord Progression” (p. 89).
Recorded chord progression patterns are saved to “ .” You can select “ ”
patterns by pressing the [-] button when pattern number 1 is displayed.
Selecting a Rhythm’s Chord Progression
FP-4-e.book 50 ページ ２００７年５月２４日 木曜日 午後７時１０分

Roland FP-4 Specifications

General

Polyphony	128 voices
Rated Power Output	12 W x 2
Effects	Reverb, Chorus
Recorder	Approx. 30, 000 notes
Display	3-digit 7-segment LED
Connectors	MIDI connectors (IN, OUT)
Power Supply	AC adaptor (included)
Included Accessories	AC Adaptor Power Cord Music Rest
Speakers	12 cm x 2