79
Settings
When playing ensemble with other instruments and in other
such instances, you can match the standard pitch to another
instrument.
The standard pitch generally refers to the pitch of the note
that’s played when you finger the middle A key. For a cleaner
ensemble sound while performing with one or more other
instruments, ensure that each instrument’s standard pitch is in
tune with that of the other instruments. This tuning of all the
instruments to a standard pitch is called “master tuning.”
1.
Press the [Function] button.
2.
Press the [Piano] button.
3.
Hold down the [Piano] button and use the [-]
[+] buttons to get “tun” to appear in the
display.
fig.d-Tuning.eps
4.
Use the [-] [+] buttons to change the setting.
fig.d-MasterTune.eps
When the instrument is shipped from the factory, this is set to
“40.0 (440.0 Hz).”
Storing the Master Tuning Setting in
Internal Memory
After adjusting the master tuning setting, you can store that
setting to internal memory.
If you’ve stored the master tuning setting, it will be preserved
even when the power is turned off.
5.
Hold down the [Piano] button and use the [-]
[+] buttons to get “bUP” to appear in the
display.
fig.d-backup.eps
When you take your finger off the [Piano] button, a
confirmation message will appear.
fig.d-BackupSure.eps
If you press the [Play] button once again, you will return
to the previous screen without storing the master tuning
setting.
6.
Press the [Rec] button.
The master tuning setting will be stored to internal
memory.
Tuning Settings
Matching the Pitch with Other
Instruments (Master Tuning)
Setting
15.3–40.0–66.2
(415.3 Hz–440.0 Hz–466.2 Hz)
FP-4-e.book 79 ページ ２００７年５月２４日 木曜日 午後７時１０分
To Next Page
Loading...
Need help?
General
